" "

五人斗地主

GRADE

五人斗地主Grade 441 (UNS S44100, EN 1.4509) is dual-stabilized Ferritic stainless steel with 18% chromium, low-carbon. This grade exhibits good high temperature strength, exceeding that of grade 409L and 439 plus good corrosion resistance in many exhaust gas environments and good oxidation resistance at elevated temperatures.

Ferritic steels are not inherently strong at elevated temperatures, but columbium additions coupled with appropriate solution annealing markedly improve long-time creep rupture strength, and this makes it suitable for using in application in tube and automotive industries.

Grade 441 is dual stabilized with niobium and titanium to provide good weld ductility and resistance to intergranular corrosion in the weld heat affected zone, which can be formed using a wide range of roll forming, mild stretch-bending or common drawing operations.


PROPERTIES

  • Corrosion resistance in many exhaust gas environments
  • Cyclic oxidation resistance
  • Creep resistance
  • Excellent formability and good weldability
  • Good ductility
  • Good for deep drawing
  • Good high-temperature strength
  • Good for polish
  • Ease of fabrication

CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES FOR 441

ItemC%Si%Mn%P%S%Ni%Cr%N%Ti%Nb%Others
Min --- --- --- --- --- --- 17.50   0.10 0.3+3 ---
Max 0.03 1.00 1.00 0.04 0.015 --- 18.50   0.60 1.00 ---
ItemTensile TestHardness Test
0.2%Y.S.1%Y.S.T.S.EL (%)HRBHV
Min 250 --- 430 18 --- ---
Max N/mm2 --- 630 --- --- ---

APPLICATION

  • Automotive exhaust manifold and other exhaust-system components
  • Catalytic converter shells
  • Clamps
  • Kitchen catering appliance, such as work surfaces, shelving, extractor hoods and hobs, sinks,
  • Wall panels and claddings
  • Elevator panels, doors and frames
  • Tubes
  • Heat exchangers
  • Exhaust system parts

SPECIFICATIONS

  • ASTM A240M – Chromium and Chromium – Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications.
  • ASTM 480M – General Requirements for Flat Rolled Stainless and Heat-Resisting Steel Plate, Sheet and Strip
  • EN 10088-2 (1.4509) – Stainless Steel Technical delivery conditions for sheet, plate and strip of corrosion resisting steels for general purposes

PRODUCT FORMS

  • Coil
  • Sheet
  • Strip

RAW MATERIAL FINISHS & AVAILABLE SIZES

2D A uniform, dull silver gray finish, which results from cold rolling followed by annealing and descaling.
Range 914 (3') 1000 1219 (4') 1250 1500 1524 (5')
0.3mm ~ 3.0mm
30GA ~ 11GA
0.012" ~ 0.1196"
2B
(Mill Finish)
A bright, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used, or a preliminary step to polishing.
Range 914 (3') 1000 1219 (4') 1250 1500 1524 (5')
0.3mm ~ 3.0mm
30GA ~ 11GA
0.012" ~ 0.1196"
GB体育 足彩论坛 足彩吧 途游游戏 鲨鱼电竞 炉石传说竞猜 趣味捕鱼 网易棋牌 幸运十二生肖 顶呱刮